Quasar CP Series HD PTZ Camera User and Installation Guide
51
IP Filter
The IP filter restricts access to the camera by denying/allowing specific IP addresses. Click the
IP filter
tab under the
category
Security
in the sidebar to display the following page.
Enable IP Filter
Check the box to enable the IP Filter function. Once enabled, the listed IP addresses (IPv4) are
allowed/denied access to the camera.
Select
Allow
or
Deny
from the drop-down list and click the
Apply
button to determine the IP Filter
behavior.
Add/Delete IP Address
Input the IP address and click the
Add
button to add a new filtered address. The Filtered IP Addresses
box shows the currently configured IP addresses. Up to 256 IP address entries may be specified.
To remove an IP address from the list, select the IP address and then click the
Delete
button.
