Quasar CP Series HD PTZ Camera User and Installation Guide
34
Click
Device Search
again. All the discovered IP devices will be listed in the page, as shown in the figure below.
The camera’s default IP address is:
192.168.0.250
.
Right-click on the camera whose network property you wish to change, and from the menu that opens, select
Network Setup
. The
Network Setup
dialog displays.
Tip:
Record the camera’s MAC address for future identification.
Do the one of the following.
For DHCP (not supported by Latitude):
a)
Select
DHCP
. Do not use for Latitude.
