DVS SpycerBox Ultra, Руководство по оборудованию

Страница: 54 / 72

5-14
SpycerBox Ultra Hardware Guide
y
Slide the new unit into the power supply until it clicks into place.
y
Tighten the security screw of the latch again.
y
Connect the power source (power cord) to the newly installed
power supply unit.
y
After that check the LED indicating the status of the power supply
unit: If it is lit up in green, the unit is working properly.
With this the power supply unit has been replaced successfully.
Only use original manufacturer spare parts. Other spare
parts might damage your system.
When completely inserted please observe that the latch is
truly in place and locking the unit.