DVS SpycerBox Ultra, Руководство по оборудованию

Страница: 45 / 72

5-5
2
1
3
5
4
Maintenance
I
A
y
Then, unlatch the disk carrier of the defective hard disk by pressing
the opener of the disk carrier (1).
This will cause the lever to come out of the disk carrier so that it pro-
trudes from the rest of the disk carriers.
y
Take the lever and turn it in its hinge (2) until it cannot be moved
further:
Figure 5-2: Pulling out the lever
This takes the hard disk installed in the disk carrier out of the system’s
interfaces inside.
y
Once the interface connections inside the system are severed, you
can pull the disk carrier out of the system.
Now the hard disk is removed from the system and it has to be replaced
in the next step.
Step 2: Replacing the Hard Disk
To replace the hard disk do the following:
y
Unscrew the screws that fix the hard disk to the disk carrier.
y
Exchange the broken disk with a new one and assemble it in the
disk carrier with the screws.
Significant environmental changes, for example, altitude,
voltage, temperature, shock, vibration, etc., can damage a
hard disk. Therefore, handle hard disks with great care.
It is best to use the same brand and type of hard disk again.
Otherwise a loss of performance might occur.
disk array at front:
disk array at rear: