Dürr Technik SICOLAB med, Инструкция по установке и эксплуатации

Страница: 22 / 36

20
1018100100L02 1907V005
Assembly
i
Install the castors without wheel lock in the
rear boreholes on the underside of the unit.
Nm
12
12
Figure 2: Install castor without wheel lock at
the rear borehole
i
Screw the castors into the boreholes (clock-
wise) and tighten them (max. 12 Nm) with an
AF 12 hexagon socket key.
i
Place the unit on the castors and check if all
castors contact the floor and roll smoothly.
Then close the wheel locks on the front cas-
tors and check if the unit is secured against
rolling away.
9.3 Establishing the compressed
air connection
10
11
10 Compressed air connection of the ventilator
9 Commissioning
9.1 Remove the packaging
The unit is securely protected with packaging
material to ensure safe transportation.
i
Remove the packaging material.
i
Check the unit for damage in transit.
i
Lift the unit off the floor.
9.2 Unit with castors
The castors are enclosed with the unit and need
to be installed before commissioning the unit.
i
Place the unit on its side.
i
Fit the castors with wheel lock in the front
boreholes on the underside of the unit.
Nm
12
12
Figure 1: Install castor with wheel lock at the
front borehole
EN