Dürr Technik SICOLAB med, Инструкция по установке и эксплуатации

Страница: 25 / 36

1018100100L02 1907V005
23
The green indicator lamp (10) is off = OFF.
5
5
O I
5 On/Off switch
The unit is not vented automatically.
For venting, carefully disconnect the
pressure hose from the ventilator. The
remaining compressed air can be
heard to escape.
10.2 Manual venting
Switch the unit off and disconnect it from the
power supply. The unit is vented via the com-
pressed air connection (10) for the ventilator
(see "10.1 On/Off switch"). For this purpose, a
compressed air gun can be connected to the
compressed air connector and can be actuated
until no air is replenished any longer.
10.3 Unit with castors
During operation, the castors of the unit must
be secured against rolling away by the wheel
locks.
10 Operation
10.1 On/Off switch
i
Move the on/off switch (5) on the rear of the
unit to the "I" position to activate the unit.
The units starts up and the pressure vessel
is filled. Green indicator LED (1) on the front
of the unit is on = ON.
1
2
3
1 Green control lamp
i
Set the on/off switch (5) to the "O" position to
switch off the unit.
Usage
EN