DURKOPP ADLER 878-M PREMIUM Скачать руководство пользователя страница 50

Страница: 50 / 130

Winder

Service Instructions 878-M PREMIUM - 03.0 - 10/2019

13.2 Setting the winder

Fig. 37: Setting the winder (1)

Proper setting

The winder wheel runs smoothly and without axial play.

The winding process will stop automatically when the required filling
quantity of the bobbin is reached.

Remove the arm cover (



p. 16

Removing the winder

Loosen the screws (1).

Remove the winder.

Setting the winder filling quantity

The position of the arms (4) on the winder lever (3) determines the filling
quantity:

•

Parallel:

Automatic winding stops at 0.5 mm below the edge of the

winder

•

Closer together:

Automatic stop with larger filling quantity

•

Further apart from each other:

Automatic stop with smaller filling

quantity

Turn the screw (2):

• Arms (4) closer together: turn counterclockwise

• Arms (4) further apart from each other: turn clockwise

Put the completely filled bobbin onto the winder.

Fold the winder lever (3) upwards as far as it will go to the thread.

(1)

- Screws

(2)

- Screw

(3)

- Winder lever

(4)

- Arm

①

②

③

④

Содержание 878-M PREMIUM



































































































































Результаты поиска

Содержание 878-M PREMIUM

Отзывы:

DURKOPP ADLER 878-M PREMIUM, Инструкция по эксплуатации, Страница: 50 / 130

Результаты поиска

Содержание 878-M PREMIUM

Отзывы: