DURKOPP ADLER 878-M PREMIUM Скачать руководство пользователя страница 27 | Manualshive

Страница: 27 / 130

DURKOPP ADLER 878-M PREMIUM Скачать руководство пользователя страница 27

Positioning the toothed belt wheels

Service Instructions 878-M PREMIUM - 03.0 - 10/2019

25

6

Positioning the toothed belt wheels

Proper setting

The two toothed belt wheels must be positioned above each other so that
the toothed belt can run correctly. The winder wheel is located directly next
to the upper toothed belt wheel and determines its alignment.

Important

The position of the upper toothed belt wheel is defined by the distance to
the winder wheel.
Therefore, you must first align the upper toothed belt wheel on the winder
wheel and then align the lower toothed belt wheel so that the toothed belt
runs correctly over both wheels.

6.1

Positioning the upper toothed belt wheel

Fig. 14: Positioning the upper toothed belt wheel

Proper setting

The two threaded pins (4) for the upper toothed belt wheel (1) are set flush
on the surface of the arm shaft (2).

WARNING

Risk of injury from moving parts!

Crushing possible.

Switch off the machine before positioning the
toothed belt wheels.

(1)

- Upper toothed belt wheel

(2)

- Surface of arm shaft

(3)

- Winder wheel

(4)

- Threaded pins

(5)

- Toothed belt

③

④

⑤

②

①

«
...
25
26
27
28
29
...
»

Содержание 878-M PREMIUM



































































































































Отзывы:

Нет отзывов