DURKOPP ADLER 878-M PREMIUM Скачать руководство пользователя страница 24

Страница: 24 / 130

Working basis

Service Instructions 878-M PREMIUM - 03.0 - 10/2019

Turn the handwheel until the appropriate arresting groove (1) or (2) is
in front of the locking opening (4):

• Small arresting groove at handwheel position 0°

• Large arresting groove at handwheel position 200° – 205°

Insert the locking peg (3) with the appropriate end into arresting
groove (1) or (2).

Removing the lock

Pull the locking peg (3) out of arresting groove (1) or (2).

Insert the plug into the locking opening (4).

3.7

Setting the handwheel into position

Fig. 11: Setting the handwheel into position

For some settings, the graduated scale on the handwheel has to be
moved to a certain position.

Turn the handwheel until the specified number on the graduated scale
(1) is next to the marking point (2).

(1)

- Graduated scale

(2)

- Marking point

①

②

Содержание 878-M PREMIUM



































































































































Результаты поиска

Содержание 878-M PREMIUM

Отзывы:

DURKOPP ADLER 878-M PREMIUM, Инструкция по эксплуатации, Страница: 24 / 130

Результаты поиска

Содержание 878-M PREMIUM

Отзывы: