DURKOPP ADLER 878-M PREMIUM Скачать руководство пользователя страница 13

Страница: 13 / 130

Safety

Service Instructions 878-M PREMIUM - 03.0 - 10/2019

Examples

Examples of the layout of warnings in the text:



This is what a warning looks like for a hazard that will result in serious
injury or even death if ignored.



This is what a warning looks like for a hazard that could result in
serious or even fatal injury if ignored.



This is what a warning looks like for a hazard that could result in
moderate or minor injury if the warning is ignored.

Puncture

Crushing

Environmental damage

Symbol

Type of danger

DANGER

Type and source of danger!

Consequences of non-compliance.

Measures for avoiding the hazard.

WARNING

Type and source of danger!

Consequences of non-compliance.

Measures for avoiding the hazard.

CAUTION

Type and source of danger!

Consequences of non-compliance.

Measures for avoiding the hazard.

Содержание 878-M PREMIUM



































































































































Результаты поиска

Содержание 878-M PREMIUM

Отзывы:

DURKOPP ADLER 878-M PREMIUM, Инструкция по эксплуатации, Страница: 13 / 130

Результаты поиска

Содержание 878-M PREMIUM

Отзывы: