Duratrax Street force GP2 Скачать руководство пользователя страница 2

Introduction.......................................................................2
Safety Precautions 
...........................................................2
Helpful Hints 
.....................................................................2
Stress-Tech

Parts Guarantee ........................................2

Repair Service ..................................................................2
Specification & Description Changes 
............................3
Screw Information 
............................................................3
Required Items for Completion
.......................................3
Tools You Will  Need 
..........................................................3
Finishing the RTR Version
...............................................4

Air Filter Installation ..................................................4
Radio Set-Up 
..............................................................4
Body Mounting
...........................................................5

Assembly of the Pre-Built Version..................................6

Preparing the Radio System.....................................6
Radio Set-Up 
..............................................................6
Air Filter Installation 
..................................................9
Body Mounting
.........................................................10

Carburetor Settings........................................................10
Breaking-In the Engine 
..................................................11
Engine Maintenance
.......................................................12
Performance Tuning 
.......................................................13
Maintenance Tips
............................................................13
Assembly Guide 
.............................................................14
Engine Trouble  Shooting 
...............................................19

Thank you for purchasing the DuraTrax Street Force GP2.
This manual contains the instructions you need to build,
operate and maintain your new nitro R/C touring car. Read
over this manual thoroughly before building or operating the
Street Force GP2.

When the safety precautions are followed, the Street Force
GP2 will provide years of enjoyment. Use care and good
sense at all times when operating this radio controlled
touring car. Failure to use this vehicle in a safe, sensible
manner can result in injury or damage to property. You and
you alone must insure that the instructions are carefully
followed and all safety precautions are obeyed.

Do not operate the Street Force GP2 near people.
Spectators should be behind the driver or at a safe
distance away from the vehicle.

The engine and exhaust produce quite a bit of noise. If
you are disturbed by the amount of noise this touring car
produces, wear ear protection such as earplugs. Do not
run this vehicle when or where it can disturb others.

The engine and exhaust can become very hot. Avoid
touching any of these parts during use and until they
have cooled down.

Model engine fuel is poisonous. Make sure you read and
follow all of the precautions on the fuel container. Keep
fuel out of the reach of children.

Model engine fuel is flammable and when ignited has a
flame that is difficult to see. Avoid sparks, flames,
smoking, or any other ignition source when fuel is near.

The engine emits carbon dioxide just like real cars. Do
not operate this model indoors.

Before turning on the transmitter, make sure that no one
else is on your frequency.

Avoid working over a deep pile carpet. If you drop a small
part or screw, it will be difficult to find.

Place a mat or towel over your work surface.This will prevent
parts from rolling off and will protect the work surface.

Avoid running the touring car in cold weather. The plastic
and metal parts can become brittle at low temperatures.
In addition, grease and oil become thick, causing
premature wear and poor performance.

Test fit all parts before attaching them permanently.

We have engineered the Street Force GP2 to take the high
speed abuse that makes R/C cars fun. We are so confident
of the quality and durability of the Stress-Tech

plastic parts

that we will replace any Stress-Tech plastic part you break
during the first 12 months you own the touring car. Just send
in the part to us and we will send you a Free replacement.
Please see the Street Force GP2 parts list for the items
covered under the Stress-Tech guarantee.

To receive your free replacement part please send the
following to the Hobby Services address listed on the cover
of this manual:

The broken part must be included.

The part number and description of the broken part.

Dated copy of your invoice or purchase receipt.

Your name, phone number and shipping address.

Repair service is available anytime.

After the 90 day warranty, you can still have your Street
Force GP2 repaired for a small charge by the experts at
DuraTrax’s authorized repair facility, Hobby Services, at
the address listed on the front page of this manual.

REPAIR SERVICE

STRESS-TECH

PARTS GUARANTEE

HELPFUL HINTS

SAFETY PRECAUTIONS

INTRODUCTION

TABLE OF CONTENTS

2

Содержание Street force GP2





















Отзывы: