manualshive.com logo in svg

Dupline G3800 X036, Руководство по эксплуатации

Поделиться
Скачать
Dupline G3800 X036 Скачать руководство пользователя страница 94

G 3800 X036 Operation Manual

August 2006

94

© 2006 Carlo Gavazzi Industri A/S. All rights reserved

5.2. Event-based SMS messages

If the mode "SMS to Dupline Online" is not selected, the GSM modem is used for control and monitoring
from mobile phones. There are 3 different ways to use the SMS messaging:

If more dial-out phone numbers have been defined, an acknowledgement can be sent to the Mastergenerator
by sending an empty SMS message back. The Mastergenerator will then stop sending messages to the 
following phone numbers.

SMS messages for AnaLink channels contain the actual AnaLink value.

If the "SMS by ON" box is checked, the Mastergenerator will send an SMS with the time and date, the 
identifying text, the description text for the channel and the status, whenever E1 becomes active. The 
recipient of the SMS will see the following message in the display of the GSM phone:

Содержание G3800 X036

















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды