G 3800 X036 Operation Manual
August 2006
84
© 2006 Carlo Gavazzi Industri A/S. All rights reserved
3. Logic Setup
3.1. Introduction
The preceding chapters have illustrated the simplicity of configuring channels with the pre-defined objects.
Praxis, however, is not always so simple. Many functions cannot be implemented by use of the predefined
objects.
The Mastergenerator offers a splendid tool for solving these tasks: the logic functions, with which any relation
can be established between the individual channels. The logic functions are described in the following
chapter.
3.2. The dialog - logic functions
3.2.1. Setup
The processing of logic functions takes place in the Dialog “Logic Setup”
Dialog
Menu
Logic setup
Logic setup
Configuration window of the Logic funtions:
Each logic block always shows eight setups. The individual blocks are selected by pressing the corresponding
block numbers. The selected block is marked by a small bar below the box.
Each setup consists of two inputs interconnected by an operand (eg AND). The result of the setup (“True or
“False”) is then assigned to the output.
