© 2006 Carlo Gavazzi Industri A/S. All rights reserved
43
Real-time and Motion
Manual or
Automatic when the Switch-On times
and activation of the
Motion detector
Either Manual or
Automatic by one of the Switch-Off
times or
by elapse of the Motion detector time
The Motion detector only controls the light within a certain time interval.
Real-time and Motion and Lux
Manual or
Automatic when the light
intensity falls below the
On-level and only when
switched on by one of
the Switch-On times
or
Automatic when the light
intensity falls below the
On-level and when
switched off by one of
the Switch-Off times,
and activation of the
Motion detector
Either Manual or
Automatic when the light
intensity rises above the Off-
level
or
Automatic by one of the
Switch-Off times
or
by elapse of the Motion
detector time
6
7
Drive way light. Operates like 5, but turns on the light outside the specified switch on times when the motion detector is
activated.
2.3.5. Temperature Control
• Function: Setting up a fully functioned temperature regulation for a single room
• Accurate PID regulation
• Integrated economy operation
• Heating and Cooling outputs
• Energy save modes
• Antifreeze
function
• Requires SHT-2-FUGA-DATALINK or SHT-2-OPUS-DATALINK display units to operate
• Output for Heater
• Output for Cooler
• DatLink Synk. Control signal for Data-exchange between the Mastergenerator and the Display units.
This is a common signal for all DataLink channeltypes.
Description:
The Temperature Control is designed for operation together with a Display unit, and forms an integrated solution
for temperature regulation and adjustments for a single room.
G 3800 X036 Operation Manual
August 2006
