manualshive.com logo in svg

Dupline G3800 X036, Руководство по эксплуатации

Поделиться
Скачать
Dupline G3800 X036 Скачать руководство пользователя страница 9

© 2006 Carlo Gavazzi Industri A/S. All rights reserved

9

G 3800 X036 Operation Manual

August 2006

1.2.4.3. Logged Data:

When connected to the G3800x036, this menu becomes active.
This tool enables uploading of the logged data, and displays the information in a simple readable manner.
Mark the check boxes for what info to display.
Press the button "Upload Log" and follow the emerging dialog-boxes.
After a while, data are displayed as listed text information.
Select the information, to view, and press the Refresh button.

1.2.4.4. OnLine Tool:

When connected to the G3800xx36, this tool becomes available.
The functions are used to test functionality, in conjunction with the “Dupline-OnLine”. 

Ping: Pressing this button causes a “Connect to Server”  telegram to be sent from the Mastergenerator to the 
Dupline-OnLine server. 

Содержание G3800 X036

















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды