Dulas Solar VC150, Руководство пользователя

Страница: 64 / 156

64
C.4 Inspection of Electric Cables
Electric cables run between the charge regulator and the solar array, the batteries,
and the refrigerator. These cables should be inspected every time you visit an
installation to make sure that they are in good condition.
(a)
Check the connections on the cables, which go to the battery terminals, the
solar array terminals, the refrigerator terminals (on the compressor controller
and on the refrigerator socket), and the charges regulator terminals strip. The
connections should be clean and tight. If they are loose, tighten them. If they
are dirty, take them off and clean them with a wire brush before connecting
them tightly.
(b) Follow each cable to its end, wherever possible. Look for the following types
of damage: the cable has been cut, the insulation is worn or the insulation has
been eaten away leaving the metal inside showing.
(c) If the cable is damaged, it must be replaced. Follow the instructions on page
83 to replace the cable.
(d)
If there is evidence of animals eating the cables it may be necessary to use
armored cable.