Duke X-STREAM WASH, Инструкция по установке и эксплуатации

Страница: 7 / 36

7
Installation and Operation of X-STREAM WASH
• Any plumbing overflows for the unit are shipped
uninstalled and will need to be installed during
installation. See below for a depiction of the main
tank overflow (Note: A main tank overflow is an
option and is not provided on some units).
F. XSTREAM WASH OPTIONS
ITEM PART NAME PART
NO.
1 Scrap Basket, X-Stream Engine,
26.5"
115749
2 Scrap Basket, X-Stream Engine,
28"
115650
3 Pan Rack, Fixed, 26.5" Wide by
60" Long Unit
115800
4 Pan Rack, Fixed, 28" Wide by
60" Long Unit 1
115801
5 Pan Rack, Adjustable, 26.5"
Wide by 36" Long Unit
115811
6 Pan Rack, Adjustable, 26.5"
Wide by 42" Long Unit
115812
7 Pan Rack, Adjustable, 26.5"
Wide by 48" Long Unit
115813
8 Pan Rack, Adjustable, 26.5"
Wide by 54" Long Unit
115814
9 Pan Rack, Adjustable, 26.5"
Wide by 60" Long Unit
115815
10 Pan Rack, Adjustable, 26.5"
Wide by 72" Long Unit
115816
11 Pan Rack, Adjustable, 28" Wide
by 36" Long Unit
115817
12 Pan Rack, Adjustable, 28" Wide
by 42" Long Unit
115818
13 Pan Rack, Adjustable, 28" Wide
by 48" Long Unit
115819
14 Pan Rack, Adjustable, 28" Wide
by 54" Long Unit
115820
15 Pan Rack, Adjustable, 28" Wide
by 60" Long Unit
115821
16 Pan Rack, Adjustable, 28" Wide
by 72" Long Unit
115822
17 Pan Rack, Drop-in 115891
18 Basket, Skewer 115833
19 Basket, Utensil 115653
DRAIN
EXTRA TUBING
USED ON 60" & 72"
TANKS ONLY
COUPLES
ELBOW
WASH TANK
Overflow Kit (Optional)
E. ELECTRICAL CONNECTIONS
: Electrical Hazard – May result
in electrical shock, burns, or death.
CAUTION
: Terminal block is phase sensitive.
Improper phase can cause incorrect pump
rotation. Pump rotation must be verified during
installation.
Your unit is supplied for connection to a 208, 240 or
480 volt grounded circuit. The electric motor, indicator
lights and control circuit are connected internally and
require no secondary power supply.
Before making any connections to these units, check
the rating plate to ensure that the voltage and phase of
the unit is compatible with the electrical supply. When
installing, all units must be electrically grounded in
accordance with local codes, or in the absence of local
codes, with the National Electrical Code, ANSI/NFPA
70 (in Canada - CSA Std. C22.2). Wiring diagrams
are located in the control compartment area of the
unit. Standard wiring schematics are also provided
with this manual.
To ensure service reliability and safety, use water-tight
connections and the proper wire gauge. A wire diagram
is located inside the control panel lid and also at the
back of this manual.