–
Turn the awl rod 13 and knife rods 21 accordingly.
–
Tighten the clamping screws 23 and 33 again.
–
Check the ease of movement of the knife rods 21 and the awl
rod 13.
–
Attach the block 18 at the "seam beginning" knife bracket again.
It is then essential to set the base position of the position plate 28.
Setting the base position of the position plate 28 of the "seam
beginning" knife bracket
The base position of the position plate 28 is set at the factory.
It must only be reset after the removal of the block 18 (e.g. for setting
the awl rods and knife rods).
–
Loosen lock nut 2.
–
Turn back the stop screw 1 slightly.
–
Turn the setting screw on star knob 20 until its surface 19 lies
centered in block 18.
–
Set the base position of the position plate 28 with the stop screw 1.
In the base position the marker lines on the knife bracket 29 and
on the position plate 28 must lie precisely above one another.
–
Tighten lock nut 2.
25
26
27
28
29
30
31
32
33
34
16
17
18
19
20
21
22
23
24
3
4
5
6
7
8
9
10
8
1 2
11
12
13
14
15
29
Содержание 745-22
