42
D U C A T I
F I X C O D E D U P L I C A T O R R E M O T E C O N T R O L G E M I N I 6 2 0 5
A) EREASE TEH MEMORY
(procedure needed also in case of new transmitters)
A1-simultaneously push and hold pushed buttons 3 & 4.
The LED will flash 3 times
A2- Continuing to hold pushed button 3; release button 4
A3- while holding down button 3, press 3 times consecutively but-
ton 4
The LED flashes to indicate that the delating procedure was suc-
cessful.
A4- Release all push buttons
To confirm that the deletion procedure was successful, you can
check that by pressing any button for one second LED does not
light.
B) DUPLICATE AN EXISTING FIX CODE REMOTE CONTROL
B1- place the remote control near the existing remote control co-
pier, as shown in picture n°2
B2- Press and keep pushed the push button on the original fix
code remote control that you wish to duplicate.
B3- Press and keep pushed the choosen button on GEMINI 6205,
after two seconds the LED light quickly flashes 3 times to indicate
it’s entered in learning mode. Hold down the buttons until the LED
blinks slowly to indicate that the radio control has been duplicated
B4- Release all buttons. The procedure has been completed.
Caution: If the copying procedure does not conclude correctly re-
peat the procedure from step 1.
1
2
3
4
Existing remote control
(any brand / model can
be duplicate if transmitts
a FIX code on 433,92MHz)
New GEMINI DUPLICA-
TOR remote control
GEMINI 6205
With this 4-channel radio remote control
you can copy and duplicate any fixed code
transmitters working on 433 MHz frequency.
Each button can duplicate a different remote
control of any brand.
pic.2
pic.1
