8
DUCATI
actuator model HC312
Installation diagram
HC312
HC312 FC (with on board open position mechanical
limit)
each model is also available in 24V version
METRIC CONVERSION
1 cm = 1⁄2
”
= 0,3
”
10 cm = 4
”
12 cm = 4
3⁄4”
= 4,7
”
14 cm = 5
1⁄2”
= 5,5“
16 cm = 6
1⁄5”
= 6,2
”
18 cm = 7
”
20 cm = 7
7/8”
= 7,87
”
25 cm = 9
3/4"
= 9,8
”
30cm = 11
8/9”
= 11,8
”
OUTSIDE
INSIDE
PUSH TO OPEN OPERATION (opens towards outside)
If your driveway slopes up after the gate, preventing it from swin-
ging in. This means the gate operator is mounted on the inside
of the property and pushes your gate out away from the property.
Warning: only compatible with telescopic tube actuators, Check
the overall dimensions before installation
.
Warning:remember to reverse the polarity of the motor cables
when connecting to the electronic board
A = min. 8cm max. 14cm
B = min. 8cm max. 14cm
PULL TO OPEN OPERATION ( opens towards inside)
This means the gate operator is mounted on the inside of the property
and pulls your gate in towards the property to open.
OUTSIDE
INSIDE
Rear pivot point of gate opener
In line with center hinge
Maximal wing dimension:
Maximal wing lenght: up to 2,5m/ 8 ft
Maximal wing weight: up to 250kg/ 500lb
100 mm
160 mm
620÷920 mm
maximal
dimension
A=8 cm A=10 cmA=12 cmA=14 cmA=18 cmA=20 cm
B=8 cm
98°
110°
118°
125°
108°
100°
B= 10cm
97°
108°
115°
120°
100°
94°
B= 12cm
95°
105°
112°
110°
100°
93°
B= 14cm
95°
103°
109°
98°
/
/
B= 16cm
94°
101°
97°
90°
/
/
B= 18cm
94°
97°
/
/
/
/
B= 20cm
93°
/
/
/
/
/
620 -920 mm
Supplied fixing braket:
choose the hole most suitable to your gate. you
can cut the plate if necessary
D= 9
cm
D= 11cm D= 13cm
D= 15,5 cm
10cm
Post fixing
Front fixing
