IFU . 2
ENGLISH
instructions for use
INsIde LaBeL MarKINGs
1
Trademark.
2
Coverall manufacturer.
3
Model identification - Tyvek® Labo model CHF7 is the model name for a hooded protective coverall with cuff, fa-
cial and waist elastification and integrated shoe covers with a slip retardant sole.
4
CE marking - Coverall complies with requirements for category III personal
protective equipment according to European legislation. Type-test and quality assurance certificates were issued in 2010 by SGS United Kingdom Ltd., Weston-
super-Mare, BS22 6WA, UK, identified by the EC Notified Body number 0120.
5
Indicates compliance with European standards for chemical protective clothing.
6
Protection against particulate radioactive contamination according to EN 1073-2:2002.
7
Tyvek® Labo model CHF7 is antistatically treated and offers elec-
trostatic protection according to EN 1149-1:2006 including EN 1149-5:2008 when properly grounded.
8
Full-body protection “types” achieved by Tyvek® Labo
model CHF7 defined by the European standards for Chemical Protective Clothing: EN ISO 13982-1:2004+A1:2010 and EN 13034: 2005+A1:2009.
9
Wearer
should read these instructions for use.
10
Sizing pictogram indicates body measurements (cm) & correlation to letter code. Check your body measurements
and select the correct size.
11
Date of manufacture.
12
Flammable material. Keep away from fire.
13
2
Do not re-use.
14
Eurasian Conformity (EAC) -
Complies with Technical Regulations of the Customs Union TR TS 019/2011. Certified by “VNIIS”, Russian Research Institute for Certification.
body
measurements
in
cm
the
five
care
pictograms
indicate
:
Size
Chest girth
Body height
S
84 - 92
162 - 170
Do not wash. Launder-
ing impacts upon
protective
performance (e. g. anti-
stat will be washed off).
Do not iron.
Do not machine dry.
M
92 - 100
168 - 176
L
100 - 108
174 - 182
XL
108 - 116
180 - 188
XXL
116 - 124
186 - 194
Do not dry clean.
Do not bleach.
XXXL
124 - 132
192 - 200
PerforMaNCe of TyveK® aNd TyveK® LaBo ModeL CHf7:
PHYSICAL PROPERTIES
TEST METHOD
RESULT
EN CLASS*
Abrasion resistance
EN 530 Method 2
> 100 cycles
2/6
Flex cracking resistance
EN ISO 7854 Method B
> 100 000 cycles
6/6
Trapezoidal tear resistance
EN ISO 9073-4
> 10 N
1/6
Tensile strength
EN ISO 13934-1
> 30 N
1/6
Puncture resistance
EN 863
> 10 N
2/6
Resistance to ignition
EN 13274-4 Method 3
pass
N/A
Surface resistance at RH 25%**
EN 1149-1:2006
inside and outside
N/A
EN 1149-5:2008
≤ 2,5x10
9
Ohm
N/A = Not applicable. * According to EN 14325:2004 ** See limitations of use.
FABRIC RESISTANCE TO PENETRATION BY LIQUIDS (EN ISO 6530)
Chemical
Penetration index EN Class*
Repellency index EN Class*
Sulphuric acid (30%)
3/3
3/3
Sodium hydroxide (10%)
3/3
3/3
* According to EN 14325:2004
WHOLE SUIT TEST PERFORMANCE
Test method
Test result
EN Class
Type 5: Particle aerosol inward leakage test (EN 13982-2)
Pass*
L
jnm
82/90 ≤30%** – L
s
8/10 ≤15%**
Type 6: Low level spray test (EN ISO 17491-4:2008 meth. A)
Pass
N/A
Protection factor according to EN 1073-2:2002
> 50
2/3*
Seam strength (EN ISO 13935-2)
> 75 N
3/6***
* Test performed with taped cuffs and hood. ** 82/90 means 91,1% Ljnm values ≤ 30% and 8/10 means 80% Ls values ≤15%. *** According to EN 14325:2004
For further information about the barrier performance, please contact your supplier or the DuPont techline: www.dpp-europe.com/technicalsupport.
TyPICaL areas of Use:
Tyvek® Labo model CHF7 coveralls are designed to protect workers from hazardous substances, or sensitive products
and processes from contamination by people. They are typically used, depending on chemical toxicity and exposure conditions, for protection against
particles (Type 5), limited liquid splashes or sprays (Type 6). Tyvek® Labo model CHF7 coveralls are designed to be used in indoor environments with
smooth floor surfaces.
LIMITaTIoNs of Use:
Exposure to certain very fine particles, intensive liquid sprays and splashes of hazardous substances may require cover-
alls of higher mechanical strength and barrier properties than those offered by the Tyvek® Labo model CHF7. The slip retardant soles of the integrated
shoe covers are not antistatically treated and are isolating. Referring to the CENELEC report CLC/TR 50404, Tyvek® Labo model CHF7 shall not be used
in ex-zones 0 and 1. It is the users responsibility to judge whether Tyvek® Labo model CHF7 can be used in other potential explosive zones. The user
shall ensure proper grounding of both the garment and the wearer. The surface of the clothing fabric shall be permanently earthed. Furthermore
the resistance between the user and the earth shall be less than 10
8
Ohm. Electrostatic dissipative protective clothing shall not be open or removed
whilst in presence of flammable or explosive atmospheres or while handling flammable or explosive substances. Electrostatic dissipative protective
clothing shall not be used in oxygen enriched atmospheres without prior approval of the responsible safety engineer. The electrostatic dissipative
performance of the electrostatic dissipative clothing can be affected by wear and tear, and possible contamination. The antistatic treatment is only
effective when relative humidity is > 25%. Electrostatic dissipative protective clothing shall permanently cover all non-complying materials during
normal use (including bending and movements). Further information on grounding can be provided by DuPont. Do not use Tyvek® Labo model CHF7
when walking on rough surfaces. In case of damage, replace the garment. Do not use Tyvek® Labo model CHF7 when walking or standing in pools
of liquids. Take care that the shoe covers are well positioned on top of the safety shoes/boots in order to obtain the correct contact of the grid to the
floor. The slip retardant grid may reduce, but not eliminate, the risk of slipping and falling. To achieve the claimed protection in certain applications,
taping of cuffs and hood will be necessary. Please ensure that you have chosen the Tyvek® garment suitable for your job. For advice, please contact
your Tyvek® supplier or DuPont. The user shall be the sole judge for the correct combination of full body protective coverall and ancillary equipment
(gloves, boots, respiratory protective equipment etc.) and for how long a Tyvek® coverall can be worn on a specific job with respect to its protective
performance, wear comfort or heat stress. DuPont shall not accept any responsibility whatsoever for improper use of Tyvek® coveralls.
PreParING for Use:
In the unlikely event of defects, do not wear the coverall.
sToraGe:
Tyvek® coveralls may be stored between 15 and 25°C in the dark (cardboard box) with no UV light exposure. DuPont has performed
tests according to ASTM D572 with the conclusion that Tyvek® does not loose physical strength over a period of 10 years. Further information can
be sent on request.
dIsPosaL:
Tyvek® coveralls can be incinerated or buried in a controlled landfill without harming the environment.
Disposal of contaminated garments is regulated by national or local laws.
The content of this instruction sheet was last verified by the notified body SGS in August 2013.
deUTsCH
GebrauchsanweisunG
KeNN zeICHNUNG eN IM INN eNeTIK eTT
1
Marke.
2
Hersteller des Schutzanzugs.
3
Modellbezeichnung - Tyvek® Labo model CHF7 ist die Modellbezeichnung für Schutzanzüge
mit Kapuze, Gummizügen an den Ärmeln, der Kapuze und der Taille und eingearbeitetem Schuhschutz mit rutschhemmender Sohle.
4
CE-Kennzeichnung - Der Schutzanzug entspricht den europäischen Richtlinien für persönliche Schutzausrüstung, Kategorie III. Die
Vergabe des Typen- und Qualitätssicherungszertifikates erfolgte 2010 durch SGS United Kingdom Ltd., Weston-super-Mare, BS22
6WA, Großbritannien (Code der Zertifizierungsstelle 0120).
5
Weist auf die Übereinstimmung mit den europäischen Standards für
Chemikalienschutzkleidung hin.
6
Schutz vor Kontamination durch radioaktive Partikel nach EN 1073-2:2002.
7
Tyvek® Labo model CHF7 ist
antistatisch behandelt und bietet bei ordnungsgemäßer Erdung elektrostatischen Schutz gemäß EN 1149-1:2006 einschließlich EN 1149-5:2008.
8
Ganzkörperschutztypen, die von Tyvek® Labo model CHF7 erreicht werden, und die in den europäischen Standards für Chemikalienschutzbekleidung definiert
sind: EN ISO 13982-1:2004+A1:2010 und EN 13034:2005+A1:2009. Anwender sollten diese Gebrauchsanweisung lesen.
10
Größenpiktogramm zeigt Körpermaße
(cm) und ordnet sie den alphabetischen Größenbezeichnungen zu. Bitte wählen Sie die Ihren Körpermaßen entsprechende Größe aus.
11
Herstellungsjahr.
12
Brennbares Material. Von Feuer fernhalten.
13
2
Nicht wiederbenutzen.
14
Eurasische Konformitat (EAC) - Erfullt die technischen Vorschriften der
Zollunion TR TS 019/2011. Zertifiziert durch „VNIIS“, russisches Forschungsinstitut fur Zertifizierung.
K
örpermasse
in
cm
b
edeutung
der
fünf
p
flegepiKtogramme
:
Größe
Brustumfang
Körpergröße
S
84 - 92
162 - 170
Nicht waschen. Waschen
hat Auswirkungen
auf die Schutzleistung
(z.B. ist der Schutz
gegen statische
Aufladung nicht mehr
gewährleistet).
Nicht bügeln.
Nicht im Wäschetrockner
trocknen.
M
92 - 100
168 - 176
L
100 - 108
174 - 182
XL
108 - 116
180 - 188
XXL
116 - 124
186 - 194
Nicht chemisch reinigen.
Nicht bleichen.
XXXL
124 - 132
192 - 200
Cat
.
III
proteCtion
level
