DTI Dyna Technology WINPOWER DE20I4, Инструкция по установке и эксплуатации

Страница: 2 / 24

SAVE THESE INSTRUCTIONS
This manual contains important instructions that should be fol-
lowed during installation and maintenance of the generator and
batteries.
Read and understand all instructions in the manual before starting
and operating the generator set.
USING THIS MANUAL
Congratulations on your choice of a Winpower generator set. You
have selected a high-quality, precision-engineered generator set
designed and tested to give you years of satisfactory standby
service.
To get the best performance from your new engine generator set,
it is important that you carefully read and follow the operating
instructions in this manual.
Should you experience a problem please follow the “Things To
Check” near the end of this manual. The warranty listed in this
manual describes what you can expect from WINPOWER should
you need service assistance in the future.
COPY YOUR MODEL AND SERIAL NUMBER HERE
No other WINPOWER generator has the same serial number as
yours. It is important that you record the number and other vital
information here. If you should ever need to contact us on this unit
it will help us to respond to your needs faster.
MODEL________________________________
SERIAL NUMBER________________________
‘M” Spec. ______________________________
PURCHASE DATE_______________________
DEALER_______________________________
TABLE OF CONTENTS
INTRODUCTION
i
GUIDE TO PRODUCT SAFETY
1
BASIC INFORMATION
2
Specification Table 2
Description 3
DSE702 Description 3
RECEIVING THE GENERATOR
3
Unpacking the unit 4
ENGINE GENERATOR INSTALLATION
Installation 4
Engine Generator Set Mounting 5
Fuel Installation 5
Lubrication 6
Coolant 6
Battery Installation 6
AC Electrical Connections 7
AC Wiring Diagram 8
Engine Control Layout 9
DSE702 Control 10
INITIAL START-UP DSE702 10
Manual Key Start Control 11
Initial Start-Up Manual Key Start 11
TROUBLESHOOTING INFORMATION
12
LAYOUT DIAGRAMS
DE20I4 13
DE30I4 13
DE45I4 14
DE65I4 14
DC SCHEMATIC - WIRING DIAGRAM DSE702
DE20I4 & DE30I4 DSE 702 16
DE45I4 & DE65I4 DSE 702 17
DC SCHEMATIC - WIRING DIAGRAM
MANUAL KEY START
DE20I4 & DE30I4 18
DE45I4 & DE65I4 19
AC WIRING - THREE PHASE
277/480 Volt 20
120/208 Volt 20
120/240 Volt 21
AC WIRING - SINGLE PHASE
120/240 Volt 21
12 MONTH WARRANTY
22
PROPER USE AND INSTALLATION
You must be sure your new engine generator set is:
* Properly serviced before starting
* Operated in a well ventilated area
* Properly exhausted and gases safely dispersed
* Wired by a qualified electrician
* Operated only for its designed purposes
* Used only by operators who understand its operation
* Properly maintained