Version 4/5/6/7
DTDAUTO VIETNAM Co., Ltd – EDITED 29/10/2020
www.dtdauto.com
63
Step 1:
Select “
SPECIAL TEST MODE
” function from main function screen
then press “
Select/ OK
” button, the screen display list of function:
Step 2:
Use “
Shift Down and Up
” to select function then press “
Enter/
OK
”. Please do the steps as instructions on the screen.
When MOTOSCAN find fault code, please enter it in MOTODATA software to
view detail (example: fault code LD0901 of HONDA LEAD before 2012)
Version 4/5/6/7
DTDAUTO VIETNAM Co., Ltd – EDITED 29/10/2020
www.dtdauto.com
64
3.15.1 Simulate signals
This function used to simulate INPUT and OUTPUT signals of ECM for almost
PGM-FI/FI motorcycles
NOTE:
You supply power for MOTOBOX after connection with motorcycle is
complete
Step 1
: Select “
SPECIAL TEST MODE
” menu from main interface of
MOTOSCAN then press “
Select/ OK
” button
Step 2:
Select “
SIGNAL SIMULATION
” menu then press “
Select/ OK
”,
the screen display as below
