Version 4/5/6/7
DTDAUTO VIETNAM Co., Ltd – EDITED 29/10/2020
www.dtdauto.com
59
Step 5:
Operate follow instructions on the screen: disconnect the spark
plug for the purpose motorcycle would not start when you press start
switch.
Step 6:
Press the "
Enter/ OK
" button the screen displays as follows:
Step 7:
Press start switch on the motorcycle to boot about 5 seconds until
the screen shows on battery quality as good, medium, bad:
The result will show by number of arrow
(example: battery quality still
about 20% of quality)
Version 4/5/6/7
DTDAUTO VIETNAM Co., Ltd – EDITED 29/10/2020
www.dtdauto.com
60
3.14.3 Check the battery capacity
Step 1
: Connect battery-checking cable between MOTOSCAN and
motorcycle follows the guidebook.
NOTES:
Connect correct electrical terminal of cable to battery
(red clamp to the
positive battery, black clamp to the negative battery).
Step 2:
Supply power for MOTOSCAN by the power cable or 220VAC-
12VDC power adapter.
Step 3
: In main interface of the screen, select "
SPECIAL TEST MODE
"
menu then press the "
Enter/ OK
" button.
Step 4:
Select the “
BATTERY CAPACITY
”
menu
to check the battery
capacity then press the "
Enter/ OK
" button.
Step 5
: Check instructions on the screen then press “
Enter/ OK
” button,
the screen displays the result:
