Version 4/5/6/7
DTDAUTO VIETNAM Co., Ltd – EDITED 29/10/2020
www.dtdauto.com
45
Step 2:
Press “
Shift Down
”
button to select “
SETTING TPS
” menu in
function table then press “
Select/ OK
” button.
Step 3:
You close throttle completely and then press “
Select/ OK
” button
Step 4:
Wait few seconds until the screen display as below:
You open throttle completely then press “
Select/ OK
”. If the setting is
successful then the screen display as below:
Version 4/5/6/7
DTDAUTO VIETNAM Co., Ltd – EDITED 29/10/2020
www.dtdauto.com
46
If the setting is not successful then the screen display as below:
You check sensor, wires and ECM then undo to step 1
3.11 PROGRAMMING SMART KEY FOR HONDA, YAMAHA
This function used to program smart key automatically for HONDA,
YAMAHA, SUZUKI:
- Read all KEYID# and ECMID from vehicle SCU
- Program smart key directly with vehicle or without vehicle (SCU is not
installed on vehicle) for cases:
+ Register more FOB# for all of cases
+ Register FOB# when lost all of the FOB#
+ Delete KEYID in SCU memory
+ Synchronize SCU & ECM for all of cases
+ Inactivate FOB# code in SCU when lost FOB#
+ Check FOB# & SCU
+ Display status of KEY (ON/OFF)
+ Display SCU information
- Restore SCU data from sample data for HONDA (this function used to
repair software inside SCU when SCU data is fault)
- Copy data from source SCU to destination SCU for all motorbikes that
have Smart key system: HONDA, YAMAHA, SUZUKI (This function used to
repair, swap SCU when have SCU hardware/software fault)
- Quick sync SCU & ECM (without FOB) for HONDA: SH, PCX, X-ADV... and
equivalent vehicles
List of vehicle as below (include other models which use similar ECMS):
- HONDA: SH 125/150/125D/150D/SM, SH 300i ABS, PCX, SH MODE ,
LEAD, AIR BLADE, VISION, X-ADV, FORZA, SUPER CUB, SCOOPY ESP, X-
ADV, CLICK, VARIO
