DTC AEON-DEC, Руководство пользователя

Страница: 58 / 89

AEON Family User Guide Commercial in Confidence Video, Broadcast
100249
Revision: 1.0 Commercial in Confidence Page 6-51
Property Value Description
Service Name Service #1 or characters
you choose This is an identifier for the service in the Transport
Stream (TS). The TS can have many services.
The receiver must align with this name for the service to
be decoded.
Program Number 1, 2, etc. A number to identify the Program. Transport Streams have
Programs, each Program is described by a
PMT .
PMT Pid 32 to 8190 Each table or elementary stream in a transport stream is
identified by packet ID (PID).
The Program Map Table (PMT) contains information about
the Program. For each Program, there is one PMT.
These can be edited but should be left to default unless
an advanced user.
PCR Pid 32 to 8190 Each table or elementary stream in a transport stream is
identified by packet ID (PID).
The Program Clock Reference (PCR) is used to sync the
audio and video. The PCR PID is listed in the PMT.
These can be edited but should be left to default unless
an advanced user.
Metadata Pid 32 to 8190 Each table or elementary stream in a transport stream is
identified by packet ID (PID).
This sets the PID for the metadata associated with the
Program. The Metadata PID is listed in the PMT.
These can be edited but should be left to default unless
an advanced user.
Video Pid 32 to 8190 Each table or elementary stream in a transport stream is
identified by packet ID (PID).
This sets the PID for the video content in the Program. The
Video PID is listed in the PMT.
These can be edited but should be left to default unless
an advanced user.
Data Pid 32 to 8190 The packet identifier for the data. The Data PID is listed in
the PMT.
These can be edited but should be left to default unless
an advanced user.
Note 1 : The mux bitrate must be equal to or greater than the total bit rate of services and inputs. If the total
bit rate exceeds the mux bitrate the output stream won’t work.
Note 2 : If you set ASI Remux to Relay it disables the video source for that channel. You must switch ASI
Remux Off when you want to reselect a video source.