AEON Family User Guide
Commercial in Confidence
Video, Broadcast
100249
Revision: 1.0
Commercial in Confidence
Page
9-61
9.3
Configurable Values
The AEON Encoder/Decoder is currently able to configure these values:
Property
Value
Description
Video Format
480i59, 480p59
576i50, 576p50
720p50, 720p59, 720p60
1080i50, 1080i59, 1080i60
1080p23, 1080p24, 1080p25,
1080p29, 1080p30
1080psf23, 1080psf24,
1080psf25, 1080psf29,
1080psf30
1080p50, 1080p59, 1080p60
2160p23, 2160p24, 2160p25,
2160p29, 2160p30, 2160p50,
2160p59, 2160p60
Select the video format for the system.
Sample Format
SQD
2SI
Square Division – each 3G-SDI link contains one
quarter of the original image.
2 Sample Interleave (2SI) – each 3G-SDI link
contains a full image at 1/4 resolution.
Note
: The Decoder outputs currently only support
3G-SDI Level A signals.
Video PID
Audio PID
PCR PID
PMT PID
SIT PID
Variable
These values
must
match the PIDs being sent by
the AEON transmitter.
IP Address
User defined or DHCP
Change the IP address if DHCP has been disabled.
DHCP Mode
On
Off
Our devices are shipped to you with the DHCP
setting enabled. This means that if the AEON
decoder is connected to a network which is
administered by a DHCP server, an IP address will
be automatically allocated to it.
If you are unsure about your server settings, check
with your Network Administrator.