AEON Family User Guide
Commercial in Confidence
Video, Broadcast
100249
Revision: 1.0
Commercial in Confidence
Page
6-42
Encoder Pane
Property
Value
Description
Video Source
Off
SDI (ASI IN)
MJPEG 1 (USB)
Select the video input source.
The physical port on the AEON Transmitter is indicated in
brackets.
Note
: SDI input will only work when ASI IN is not being used
for Remux. See
Section 0
.
Video Format
Automatic
576i50 (PAL),
480i59 (NTSC)
720p50, 720p59,
720p60
1080i50, 1080i59,
1080i60
1080p23, 1080p24,
1080p25, 1080p29,
1080p30
1080psf23,
1080psf24,
1080psf25,
1080psf29,
1080psf30
Select the
Video Format
that aligns with the camera you
are operating.
The
Automatic
setting lets the AEON Transmitter establish
the signal automatically.
Power-up standard in Automatic mode defaults to PAL. This
can be changed by setting the input to NTSC for example
and then back to Automatic.
If video lock is lost for
any
reason, Automatic will need to
be re-applied.
OSD Position
Off
Top Left
Top Centre
Top Right
Centred
Bottom Left
Bottom Centre
Bottom Right
Sets the position of the On Screen Display (OSD) which will
appear on your screen when you play video.
OSD Type
Date Time
Service Name
Date Time Name
Will let you select what details appear on the OSD.
Bitrate Ratio
0 to 100%
Allocates more bitrate to one channel than the other.
For example you can have a high resolution image on the
high bit rate channel and a low resolution wide shot on the
low bit rate channel.
Advanced Mode
Set or clear
When this is clear, use the slider to auto set video encoder
settings.
When this is ticked, see below for
Advanced
settings.
Frame
Rate/Resolution
Slider
Auto set
The video settings will be automatically selected for
optimum performance by using this slider.
