AEON Family User Guide
Commercial in Confidence
Video, Broadcast
100249
Revision: 1.0
Commercial in Confidence
Page
4-17
4.
Getting Started
These instructions give the information required to power up and control an AEON device.
4.1
Power
AEON Transmitter
There is no power switch, the AEON Transmitter will start the moment the power supply is connected.
Power can be supplied to the AEON Transmitter in two ways:
Via a battery – AB or V mount depending on the device battery mounting plate
Via 9.2–17.8VDC input to the power connector on the bottom panel
AEON Decoder/Encoder
Power to the AEON Encoder or Decoder is supplied via the 12–17V DC input on the rear panel via the
supplied
CA0649
12V PSU. Power on/off is controlled by the front panel switch.
Push and release to switch on, the switch will latch. Push and release to switch off, the switch will unlatch.
4.2
Access the USB Stick
The USB support stick includes this user guide plus
Node
Finder
, an application which you will need to
establish the AEON Transmitter IP address.
1.
Plug the USB stick into the USB port of your PC.
2.
The USB stick device drivers will load the first time you plug it in to your PC. Wait for the drivers to load
successfully, you should see the progress in the bottom right of your PC screen.
3.
Once they have loaded, a USB drive will have been created. Open Windows Explorer and you will be able
to view the USB stick contents.
