SPLINE
®
Technical Manual
4
General
V2
01
3.
1
1
_E
N
DT Swiss Manual Concept
The DT Swiss manuals are splitted into the following types of manuals:
•
User Manual
Information for the end user of how to install and use the component.
•
Technical Manual
Detailed information for the end user and the dealer of how to maintain the component, spare parts
and technical data.
How to Use this Manual
The steps described in this manual must be carried out in the order they are shown. If steps are ignored or exe-
cuted in a wrong order, the function of the component cannot be guaranteed.
Instructions are beginning with the table «Preparatory Steps» and ending with the table «Closing Steps». The
instructions in these tables must be carried out.
Moving parts, threads, o-rings and sealings must be greased before assembling.
Cross References
In order to simplify the use of this manual, some text is edited as hypertext. Whenever the text is formatted
blue and underlined, you can click on the text. After clicking you will be automatically redirected to the target
of the link.
Example: Click here:
to jump to the beginning of this chapter.
Warranty (Europe)
In addition to the general guarantee required by law, DT Swiss AG based in Biel/Switzerland, provides a gua-
rantee for 24 months from the date of purchase in accordance with European Directive 99/44/EC. DT Swiss AG
shall reject any liability for both indirect damage caused by accidents and consequential damage.
Any contradictory or extended national rights of the purchaser are not affected by this warranty. Place of per-
formance and jurisdiction is Biel/Switzerland. Swiss law shall apply.
Submit any warranty claims to your retailer or a DT Swiss service center. Any defects recognised by DT Swiss AG
as a warranty claim will be repaired or replaced by a DT Swiss service center.
Warranty and guarantee claims can only be made by the original purchaser with a valid sales receipt.
There shall be no claim under the guarantee for:
•
Normal wear and tear caused by use of the components
•
Incorrect assembly
•
Incorrect or non existent maintenance
•
Incorrectly completed repairs
•
Use of unsuitable products
•
Modification of components
•
Incorrect use or misuse
•
Carelessness
•
Leasing, commercial use or use in competitions
•
Damage caused by accidents
•
Delivery and transport damage
•
Modification, defacing or removal of the serial number
