SPLINE
®
Technical Manual
7
Safety
V2
01
3.
1
1
_E
N
2 Safety
DANGER
Incorrect handling, installation, maintenance or servicing can lead to accidents causing
severe injuries or death!
• Compliance with the following provisions is a prerequisite for accident-free use and faultless
functioning.
• Assembly and maintenance of the component requires a basic knowledge of handling bicycle
components. If in any doubt, consult your retailer.
• Components should only be used in accordance with their intended use, otherwise the user shall
assume full responsibility.
• The component must be compatible with all parts of the bicycle.
• Only use original spare parts.
• The components must not be changed or modified.
• The component must not be used if it is damaged or there are any signs of damage. If in any
doubt, consult a DT Swiss service center.
DANGER
Risk of death caused by incorrectly assembled or faulty wheels and hubs!
• Check that the wheel is connected correctly before each ride.
• Before every use, check the function of the rear wheel hub. Make sure that the freewheel and en-
gagement connection function impeccably. Should there be any malfunction, the rear wheel hub
must not be used.
• Check the wheel for damage before and after each ride.
• Regularly check the spoke tension, rotation and wear of the wheel.
