SPLINE
®
Technical Manual
37
Ma
int
e
n
a
nc
e of
the
Re
ar
Wh
ee
l
Hu
b [
T
w
o
P
a
w
l Syst
em]
V2
01
3.
1
1
_E
N
Mounting the Needle Cage, the Pawl and the Spring
1.
Grease the needle cage (fig.4.5/11) and the need-
les using multi purpose grease.
2.
Grease the bearing shell (fig.4.5/12), the inner sur-
face of the hub shell, the axle and the thread
using multi purpose grease.
3.
Slide the needle cage (fig.4.5/11) onto the hub and
attach the needles using forceps (or s.th. similar).
4.
Check if all needles are attached correctly inside
the needle cage.
5.
Attach both pawls (fig.4.5/9).
Grease the pawls generously. This way, the pawls
stuck in the correct position.
