Exit Telnet
How to Setup IP870 in NAT Environment
7-5
NAT Port Index Converter
NAT TCP Port Index 0 1 2 3 - - - - - 255
NAT Voice Port (UDP) Index 0 1 2 3 - - - - - 255
TCP Port Number 1801 1802 1803 1804 - - - - - 2056
UDP Port Number 1102 1103 1104 1105 - - - - - 1357
Exit Telnet
1.
At the prompt displays
Select an item to setup
(or quit):
, type
quit
and press Enter to leave
(19) NAT Setup
.
2.
At the prompt displays
Select an option to
setup:
, type
20
and press Enter to save and
exit Telnet.
Port Mapping
After you set the NAT Port Index to IP870, refer to the
NAT Port Index
Converter
blow, write down the TCP and UDP port numbers and its
correspondent IP address in order to perform the port mapping on your IP
Sharing equipment or NAT router. To know how to perform port mapping,
consult with your vendor of IP Sharing equipment or NAT router.
