Telnet Setting Items
How to Setup IP870 in NAT Environment
7-3
Telnet
(0) Device ID : xxxxxx
(1) IP Type: Static/PPPoE/DHCP
(2) IP Address : 192.168.0.30
(3) Gateway IP : 192.168.0.254
(4) Subnet Mask : 255.255.0.0
(5) DNS IP : 168.95.1.1
(6) PPPoE ID:
(7) PPPoE Password:
(8) Open to Public: On/Off
(9) Volume : 5
(10) Backlight : Automatic
(11) Voice Delay : Low (default)
(12) E-mail Address :
(13) ITSP Account :
(14) Your Phone Number:
(15) Long Distance Code :
(16) International Code :
(17) Country Code :
(18) IP Phone Book :
(19) NAT Setup :
(20) Exit (Save)
(21) Exit (without save)
Select the option to setup:
You can change Telnet password from IP870
setting item. Please refer to
Chapter 3 IP870
Configuration Mode
.
You can see setting items as below displayed on the Telnet window. For
most setting items, you can configure directly from your IP870. You only
need to Telnet your IP870 to enable its NAT function when your IP870 is in
NAT environment. i.e. you assign a private IP address to IP870.
Telnet Setting Items
