Basic Setup (Device-to-Device / Device-to-Phone Mode)
1.
Press and hold button for 2 seconds
and the LCD screen will show
IP TYPE
. Pick
up the handset and press to edit
this option.
2.
Press till the LCD screen displays
STATIC
. Press to save.
3.
Press and the LCD screen will show
STATIC IP
. Press to edit this option. Use
the keypad to input one of the IP address.
Press to save.
4.
Press and the LCD screen will show
GATEWAY IP
. Press to edit this option.
Input the gateway IP address with your
keypad. Please check your ISP or network
administrator for this information. Press to
save.
5.
Press and the LCD screen will show
SUBNET MASK
. Press to edit this
option. Input your subnet mask with your
keypad. Please check with your ISP or
network manager for this information.
Press to save and exit.
If you can obtain a static IP address from your ISP, setup your Internet
access as below.
Basic Setup
(Device-to-Device / Device-to-Phone Mode)
3-6
IP870 Operation Manual
Before you start using your IP870, you need to subscribe an Internet access line from your
local ISP. It could be ADSL, Cable Modem or Leased Line. You will be given the
following information: (1) Available IP address (2) Gateway IP address (3) Subnet mask.
Some DSL ISPs provide PPPoE connections with end users. If you use dial-up DSL and
obtain a dynamic IP address automatically from your DSL ISP, you will be given (1) User
Name (2) Password.
S t a t i c
I P T Y P E
0 0 0 . 0 0 0 . 0 0 0 . 0 0 0
S U B N E T M A S K
0 0 0 . 0 0 0 . 0 0 0 . 0 0 0
G A T E W A Y I P
0 0 0 . 0 0 0 . 0 0 0 . 0 0 0
S T A T I C I P
