15
ENIGMA-X / SPARKLE manual Ver 6 Rev 4 07/2016
1
2
3
Fig 15
outside
Panel end
Door end
Glass bracket
Guide Rail Bracket
TIP:
Adjust the installed
Upper Guide rail (#03)
to level as necessary
using the
Guide rail brackets
(#08)
first and then the
Glass brackets
(#07)
. Start adjustments from the door end.
(Right hand door installation shown as example)
NOTE
: Use the
Guide Rail Bracket (#08)
set screws to adjust the
Guide Rail (#03)
for level.
Loosen the top set
screw and tighten the
bottom set screw to
lower the rail.
Loosen the bottom
set screw and tighten
the top set screw to
raise the rail.
14.
Re-position the
Stationary glass (#02)
and
Upper
Guide rail (#03)
onto the threshold and fasten both sleeves
of the
Guide rail brackets (#08)
to the brackets on the walls.
Tighten the set screws on the
Guide rail brackets (#08)
to
secure the
Upper guide rail (#03).
Position the bracket set
screws
so that they are accessible from the top and bottom.
(Fig 15.2 & 15.3)
Assemble the
Wall bracket (#19)
at the bottom corner of
the
Stationary glass (#02).
Use the clear vinyl gasket
between the glass and the metal parts to avoid contact with
the glass, then tighten the bolt with the supplied allen
wrench.
See Fig 15 for details
