11
ENIGMA-X / SPARKLE manual Ver 6 Rev 4 07/2016
Fig 9
inside
inside
1
2
3
Fig 10a
4*
Fig 10b
8.
Once the
Upper Guide Rail (#03)
is level, mark the position
of the
Wall bracket (#19)
and
Guide Rail brackets (#08)
on the
wall.
*NOTE:
If installing the 72” model, perform the same procedure
on the opposite wall to mark the
Wall bracket (#19)
for the
Small stationary panel glass (#23).
(Fig 9.4*)
See Fig 9 for details
9.
Make sure that your
Stationary glass (#02)
is parallel to the
front edge of the threshold and mark it. Slide the
Guide Block (#12)
into the notch of the
Stationary glass (#02)
, and align flush with
the edge (Fig 10a). Mark its position and also mark the hole for
drilling using a pencil (or center punch.)
Note:
If installing the 72” model, also position the
Small Stationary
glass bottom bracket (#22)
with the edge of the
Small stationary
Glass (#23)
(Fig 10b) and mark its position and the hole for drilling.
See Fig 10a & 10b for details