21
ENIGMA-X / SPARKLE manual Ver 6 Rev 4 07/2016
Fig 26a
(ENIGMA-X Right hand door
installation shown as example)
3”
wall
(+/- 1/8”)
Door Stopper Installation:
1. Remove the set screw (Be sure to cover the shower drain to prevent loss)
2. Slide the
Door Stopper (#01)
onto the
Upper Guide Rail (#03)
3. Align with stopper hole (stationary panel side only)
4. Apply
Thread Lock Adhesive (#26)
to the set screw threads
5. Tighten screw into the stopper hole (stationary panel side only)
6. Correctly position and tighten the set screw into the stopper (door side)
See Fig. 26b for details
Fig 26b
!
3
2
Stopper
hole
1
Stopper
Thread Lock
Panel side
Stopper (#01)
4
Door side
Thread
Lock
72” model with Right hand
door installation
24.
Position the
Door Stoppers (#01)
and screw them tightly to
the
Upper Guide Rail (#03)
.
NOTE:
The
Door stoppers (#01)
must be positioned correctly to
prevent the handle from contacting the
Stationary glass (#02)
(48”, 60” & 72“ models) and to stop the
Door Glass (#05)
in a
position that allows the bumper strip to create a seal with the wall,
but does not allow the door glass to bang into the wall during
normal operation (48”& 60” models).
See Fig
26a & 26b for details
Note
:
If installing the
72” model
, position the
door-side stopper so
that the handle cannot
make contact with the
small inline panel glass
when the door is in the
closed position.
