ENIGMA-X / SPARKLE manual Ver 6 Rev 4 07/2016
A
Guide Rail Brackets
must be firmly
attached to the wall.
Installation into a
stud is strongly recommended.
All of the guide rail bracket set
screws must be tightened.
B
Thread Lock must be applied to both
stopper set screws.
Panel-side stopper must be installed
into the pre-drilled stopper hole in
the upper guide rail.
Door-side stopper must be installed
at the proper position to stop the
door from contacting the wall.
E
Bumper Vinyl Seal must be installed on
the closing edge of the door glass
D
Roller Guards must be postioned and
secured within 1/16” of Upper Guide Rail
F
The Guide Block
must be screwed to the
threshold
and installed square to the panel
glass and door glass. Installing the guide
block crooked may damage the bottom edge
of the door glass and lead to breakage.
C
Roller Wheel Safety Set Screws must
be re-tightened after installation
A
B
D
F
E
C
B A
DOOR
PANEL
Right hand door installation shown as an example
PLEASE READ THE ENCLOSED INSTALLATION
MANUAL FOR DETAILS REGARDING PROPER
INSTALLATION.
THE LATEST VERSION OF THE INSTALLATION
MANUAL IS AVAILABLE TO VIEW OR PRINT
ON DREAMLINE.COM
!
IMPORTANT INFORMATION
REGARDING THE INSTALLATION
OF THIS SHOWER DOOR
