Dranetz PowerVisa, Руководство пользователя

Страница: 86 / 274

5-8
Current Probe Selection
Current Probe Selection
Selecting
current probe
Follow these steps to monitor current and select probe type.
Continued on next page
Action... Result...
STEP 1: From the Start Menu,
press Setup new circuit.
• If current will not be
monitored, press Next . Go to
page 5-10.
• If current will be monitored,
press Change to display the
probe types available for each
channel. Proceed to Step 2.
• If using identical probe type for
all channels, press to enable Set
Identical . The display will
change to show only one probe
selection. Press
Change to
display the probe types
available. Proceed to Step 2.
• If you want to enable/disable
current channels, press to
select/deselect
Enable
Currents .
• Press Cancel to quit and return
to Start menu.
MARK101
MARK103
STEP 2: Select your desired
probe type.
NOTE: Use the same probes for
the following: TR2500 for
TR2500A, TR2510 for TR2510A,
TR2520 for TR2520A.
• If the current probe that you are
using is not on the list, select
Other . Then press Scale to
define the CT scale factor on
the current probe. Proceed to
Step 3 on page 5-9.
MARK104