Operation in Measurement Mode
32
Operating Ins
tructions V
amos, 1
. US ed.
Terminating Operation
Terminating Operation
●
Remove the SpO
2
sensor from the patient.
To keep the monitor ready for further use:
●
Press Standby key »
« to switch monitor to Standby
mode. The yellow LED in the key lights up.
The next time the monitor is operated, the following individually
set will again be activated:
— CO
2
unit
— display brightness
— MEDIBUS baud rate
— language
For all other parameters the default values will be activated.
To shut down the monitor:
●
Switch the ON/OFF switch in the back of the unit to »
%
«
in order toswitch off the monitor.
02
7
3
7
1
63
D
Vamos
0283
7
1
63
RETURN TO THIS MANUAL'S TABLE OF CONTENTS
RETURN TO CD-ROM TABLE OF CONTENTS
