Operation in Measurement Mode
24
Operating Ins
tructions V
amos, 1
. US ed.
Applying the Oxisensor I-20 (Option)
Reusing sensors
If the strip is still sufficiently adhesive, the sensor can be
reused on the same patient. Small additional adhesive patches
improve the adhesion.
●
Hold adhesive patches by the blue tab and tear off the
paper backing.
●
Place a patch concentrically over the middle of each optical
element.
●
Remove the protective backing.
●
Apply sensor as described above.
Other measuring point
The preferred application site is the big toe, because it moves
less than the hand. If the big toe is not available, the thumb can
also be used.
●
Remove protective backing from the adhesive tab.
●
Place sensor under the thumb, so that the dotted line
overlaps the edge of the thumb, and the marking is
centered over the surface of the thumb.
●
Wrap the sensor around the thumb, so that the other
marking comes to lie directly over the thumbnail.
●
Affix sensor lead to the hand with the additional adhesive
strip.
0
1
83
7
1
63
0
1
83
7
1
63
0
1
93
7
1
63
RETURN TO THIS MANUAL'S TABLE OF CONTENTS
RETURN TO CD-ROM TABLE OF CONTENTS
