manualshive.com logo in svg

Dräger Medical Babytherm 8004, Техническая документация инструкция

Поделиться
Скачать
Dräger Medical Babytherm 8004 Скачать руководство пользователя страница 99

This test list can be processed with standard commercially available test aids and tools, but does not replace the inspections 
and maintenance work carried out by the manufacturer.

6132.300 Babytherm 8004/8010

 Test List

 

Page 5

K6132300TL1.fm

 24.03.06

Copyright 

reserved. Rep

roduct

ion 

allow

e

d f

o

r non-commer

c

ia

l purposes only.

4

Tests as per VDE 0751 Part 1 (follow to local 
legislation, standards and regulations)

Condition of power cord

Mains fuses

Main fuses should match the values specification on nameplate.

4.1

Checking the Protective Conductor Resistance

This section describes how to measure the protective conductor resi-
stance of the trolley, column, electrical height adjustment (optional), 
mount of the control unit, and mattress heater (Babytherm 8010).

•

Plug the power cord of the Babytherm into the VDE tester.

•

Connect COM test probe into the COM test socket of the VDE 
tester.

•

Plug the power cord of the VDE tester into the mains power outlet.

•

Switch on the VDE tester.

•

Apply the COM test probe to the trolley, column, electrical height 
adjustment (optional), mount of the control unit, and the aluminium 
plate of the mattress heater (Babytherm 8010) and, at the same 
time, press the “protective conductor button” on the VDE tester.

The protective conductor resistances of the trolley, column, electrical 
height adjustment (option), mount of the control unit should be equal to 
or lower than 0.2 Ohm.

The protective conductor resistance of the aluminium plate of the 
mattress heater (Babytherm 8010) should be 

Ohm.

NOTE

Test electrical safety using the common power cord of the Babytherm 8004 
or the Babytherm 8010.

WARNING

The resting surface of the mattress heater is not to be earthed on the 
Babytherm 8004 or Babytherm 8010 of class BF.

Содержание Babytherm 8004















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды