Dräger Medical Babytherm 8004, Техническая документация инструкция

Страница: 56 / 110

All right
s re
served.
Copyright reserved.
V
e
rsi
o
n
2
.1_
R
e
le
ased
_P
ri
n
ted
on
_2
8.0
3.0
6
_
F
6
1
3
2
3
00_
Fun
cti
o
n
_de
scr
ip
ti
on
.fm
50
6132.300
Function Description Babytherm 8004/8010
4 Bed assembly
The bed assembly is provided with a mattress heater.
The bed assembly has the following subassemblies:
– Bed assembly
– Bottom part of tilt mechanism, screwed to base plate
– Tilt mechanism
– 4 panel mounts
The following side panels can be attached to the bed assembly:
– High side panels (23 cm)
– Low side panels (15 cm)
– Inner panels (7 cm)
The bed assembly can be latched in different positions in finely graduated
steps. By tilting the bed the head of the patient can be moved to the maxi-
mum head-up position (20°) or to the maximum head-down position (15°).
– Pull the unlocking handle in direction of A .
– Pushing the handle down ( B ) will change the head-up position. Pulling
the handle up ( C ) will change the head-down position.
Figure 26 Tilting the bed