manualshive.com logo in svg

Dräger Medical Babytherm 8004, Техническая документация инструкция

Поделиться
Скачать
Dräger Medical Babytherm 8004 Скачать руководство пользователя страница 103

This test list can be processed with standard commercially available test aids and tools, but does not replace the inspections 
and maintenance work carried out by the manufacturer.

6132.300 Babytherm 8004/8010

 Test List

 

Page 9

K6132300TL1.fm

 24.03.06

Copyright 

reserved. Rep

roduct

ion 

allow

e

d f

o

r non-commer

c

ia

l purposes only.

5.1.3

Checking the Work Light in the Radiant Heater

•

Switch on the control unit.

•

Press the work light key.

The energy-saving lamps (work light and night light) in the radiant hea-
ter come on.

Press the work light key again.

The energy-saving lamps (work light and night light) in the radiant hea-
ter go out.

5.1.4

Checking the Night Light in the Radiant Heater

•

Switch on the control unit.

•

Press the night light key.

The small energy-saving lamp (night light) comes on.

•

Press the night light key again.

The small energy-saving lamp (night light) goes out.

5.1.5

Checking the Phototherapy Lamps in the Radiant Heater 
(option)

•

Switch on the control unit.

•

Press the phototherapy key.

•

Press the OK key.

All phototherapy lamps (halogen lamps) come on.

•

Press the phototherapy key again.

•

Press the OK key.

All phototherapy lamps (halogen lamps) go out.

5.1.6

Checking the Mattress Heater (Babytherm 8010)

•

Place the gel mattress on the resting surface.

•

Switch on the control unit.

The mattress heater warms up to the specified value.

Содержание Babytherm 8004















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды