Dräger Medical Babytherm 8004, Техническая документация инструкция

Страница: 57 / 110

6132.300
All rig
ht
s reserved.
Copyright
re
se
rved.
V
e
rs
io
n
2
.1_
R
e
le
a
s
ed
_Pr
in
ted
on
_28
.03
.0
6_F6
13
230
0_
Fun
cti
on_
de
scri
p
ti
o
n
.fm
51
Babytherm 8004/8010 Function Description
4.1 X-ray drawer
The Babytherm 8010 comes with an X-ray tray.
Figure 27 Babytherm 8010 with X-ray tray
5 Mattresses
The Babytherm 8010 can be equipped with different types of mattresses.
5.1 Gel mattress
The gel mattress fits snugly to the body contours of the patient. This produces
a large contact surface which transports the heat to the patient and avoids
pressure spots (anti-decubitus effect).
The gel is a good heat accumulator. If the mains power supply is interrupted,
e.g. for in-hospital transportation, the patient is warmed for about another 15
minutes given a sufficient insulation (bed pillow, canopy). If the gel mattress is
cold, heat is dissipated from the patient.
The viscosity of the gel does not change even when the bed is tilted. The gel
mattress is covered with a soft, non-irritant layer.
WARNING
Danger of burns to the patient! Do not use the gel mattress in units
which allow a mattress tray heating temperature of more than 40 °C.
The patient would be heated to more than 40 °C. Use the gel mattress
only in units which allow a mattress tray heating temperature of less
than 40 °C.
WARNING
Risk of hypothermia in the patient! Do not use the gel mattress when
the mattress tray heater is switched off! Always switch the mattress
tray heater on when using the gel mattress.
CAUTION
Risk of irreversible damage to the gel mattress! Sharp objects may irre-
versibly damage the gel mattress. Keep sharp objects away from the gel
mattress.