14
Now you're ready to do the rest of your configuration via LAN. Plug your LAN cable into the NetDog 82 BW
and see Section 9, "Logging On to the NetDog 82 BW" to continue databasing using the Web Browser.
...via LAN
9.2
Fig. 9.2 - Connection through Ethernet port
To connect to the NetDog 82 BW via LAN, all you need is the unit's IP address (Default IP address is
192.168.1.100).
If you DON'T have LAN, but DO have physical access to the NetDog 82 BW, connect using a LAN
crossover cable. NOTE: Newer PCs should be able to use a standard straight-through LAN cable and handle the
crossover for you. To do this, you will temporarily change your PC's IP address and subnet mask to match the
NetDog's factory default IP settings. Follow these steps:
1. Get a LAN crossover cable and plug it directly into the NetDog 82 BW's LAN port.
2. Look up your PC's current IP address and subnet mask, and write this information down.
3. Reset your PC's IP address to 192.168.1.200.
4. Reset your PC's subnet mask to 255.255.0.0. You may have to reboot your PC to apply your changes.
5. Once the IP address and subnet mask of your computer coincide with the unit, you can access the
NetDog 82 BW via a Telnet session or via Web browser by using the unit's default IP address of
192.168.1.100.
6. Provision the NetDog 82 BW with the appropriate information, then change your computer's IP address
and subnet mask back to their original settings
Содержание NetDog 82 BW
Страница 47: ...43...