DPS Telecom NetDog 82 BW, Руководство пользователя

Страница: 29 / 48

25
Accumulated Time The total time the monitored point has been in an ALARM state.
Accumulated Since
Indicates the last time the accumulation timer was reset.
Reset Accumulation
Timer Placing a check mark here will reset the timer when the user presses the
Submit button.
Table 11A - Field descriptions in the Accumulator Timer Settings
11.3.2 Viewing Live Target Pings
Choose P)ing to ping any of the NetDog's user defined IP addresses. Then enter the ID number (1-32) of the IP
address or enter any IP address to ping.
Fig. 11.9 - Continuously ping an IP address that has been defined in the NetDog's ping table
11.3.3 Proxy Menu
You can create proxy connections to reach-through to the craft port or modem port from the P)roxy menu. You'll
be able to monitor and control additional devices via proxy connection to the NetDog.
To cancel the proxy connection wait a half second, then quickly type @@@ and press ENTER.
Fig. 11.10 - . Access devices connected to the Craft Port and Modem through M)onitor menu > P)roxy option
11.3.4 Event Logging
Choose E)vent log to view the up to 100 events posted to the NetDog; including power up, base and system
alarms, ping alarms, analog alarms, and controls. Posted events for the various alarms include both alarm and
clear status. Refer to Table 13.3.4.A for event log field descriptions.
Note: All information in the event log will be erased upon reboot or a power failure.