DPS Telecom NetDog 82 BW, Руководство пользователя

Страница: 21 / 48

17
How to Receive Wireless Alarm Notifications 11.2
The following How-TO guide describes how to setup SNMP traps over your wireless connection. Steps shown
using the TTY interface can also be performed via LAN using the Web Browser interface. See section
"Configuring PPP Modes" in the NetDog 82 BW Web Browser User Manual for instructions.
1. Open the software tunnel for the wireless provider you selected. DPS Telecom recommends CrossBridge
Solutions and will be using this provider in the example.
2. Access the TTY interface for the NetDog 82 BW using terminal-emulating software on your PC. Logon to the
NetDog and press C)onfig > E)dit. (For help accessing the TTY interface via NetDog's craft port, see section,
"Quick Start: How to Connect to the NetDog 82 BW via Craft Port".)
3. Press P)PP to edit the PPP settings. Here, you'll need to configure the wireless Mode and Phone settings. Press
M to select a wireless reporting mode. In this example, onDemand mode is used and is recommended by DPS.
(See table below.)