Douwe Egberts Cafitesse 110, Руководство по обслуживанию

Страница: 70 / 93

Cafitesse 100 Next Generation Functions - water system
5A-12
August 2009
Fig. 1
Fig. 3
Fig. 2
Remove the overflow hose (fig. 1).
Disconnect the plugs (1 to 3) of the heating
elements from the power supply and pull the ca-
bles upwards out of the dispenser (see chapter
A.2.5).
Undo the 2 flat connectors of the temperature
sensor and the cable connection of the level
sensor at the boiler lid (see chapter 2.4).
Remove the water inlet hose and take the cable
harness boiler out of the clamp at the boiler lid
(see chapter A.2.5).
ATTENTION: Take care not to damage the
silicone hose during the dis-
assembly of the boiler.
Note:
Draw the hose out of the bottom
part of the machine so that it
doesn‘t get caught when lifting the
boiler out of the dispenser (fig. 2).
Pull the complete boiler together with the drain
tube upwards out of the housing and then place
it on a plane surface (fig. 3).
Note: The reassembly is carried out in
reverse order.
•
•
•
•
•